Forum: General Discussion
If you need extended support, contact our Support Team.
Forum Guidelines (*) The moderators hold the rights to remove, move or modify posts.
Screens on the...
Sujet Screens on the MCX 8000 Stopped Working
Not sure if I should post here or not but wanted to let some one up there in VDJ Land that my screens on my MCX 8000 stopped working ever since I down loaded v8.3 b4675 today. 11/21/18
I do have full control of VDJ from the controller "so far"..
Any insight would be great. Or a patch would be better...
Thank You ahead of time.
Posté Thu 22 Nov 18 @ 3:09 am
Posté Thu 22 Nov 18 @ 3:11 am
Will set my one up later this morning and let you know what happens.
Posté Thu 22 Nov 18 @ 6:35 am
Posté Thu 22 Nov 18 @ 9:11 am
in regular mode they way it's been they do NOT work..
Also there is a flicker when the blue LED is set to single and and goes around..... at a certain point the LED's that should be off lightly flicker.. like at the North South West East sides.
again.. I had no problem before this build!!
Posté Mon 26 Nov 18 @ 3:36 am
Posté Mon 26 Nov 18 @ 3:37 am
Best try that first but it's definitely working here.
Posté Mon 26 Nov 18 @ 4:38 am
Posté Mon 26 Nov 18 @ 9:13 pm
I was hopping one of the VDJ Gods in here would see this and shed some insight on it!?....
Posté Wed 28 Nov 18 @ 2:28 am
I used other software to make sure the board is not broken and it’s not, the Screens work fine.
Can someone in VDJ look into this or contact me?
Posté Thu 13 Dec 18 @ 11:32 pm
Posté Fri 14 Dec 18 @ 6:04 pm
I used the MCX8000 last night and it works fine on build 4675
Posté Fri 14 Dec 18 @ 7:01 pm
I may delete and reinstall vdj completely I have back ups.. of my crates... or I'll try the xml or I'll try reinstalling the drivers... It was working fine...... I'd love to do a screen share with one of the VDJ techs and see If there's something else wrong....
Posté Sun 23 Dec 18 @ 2:40 am
Posté Sun 23 Dec 18 @ 2:47 am
Touch-strip for track's search. For security reasons, the strip will not have any effect when the track is audible (track is playing and its Channel Fader is away from the minimum position).
Hold SHIFT and then use the same touch-strip to navigate through the track regardless the track's playing/audible status.
LED around the platter is set by Utility/JogIndicatorType on the controller.
Posté Sun 23 Dec 18 @ 7:45 am
I'm going to wipe VDJ off the computer and re-install it and reset the controller and flash the new firm where to it again.
Posté Mon 07 Jan 19 @ 12:39 am
Posté Mon 07 Jan 19 @ 11:26 am