pOpYDJ
We will see if there will be an answer from the team!!!!!!
Posté Sat 22 Sep 12 @ 10:59 am
Secret Beats
zambari wrote :
+5 on midi clock output.
I know many people are happy with vdj as rewire master but I personally don't benefit from it at all (I route its signal through Ableton via soundflower and live needs access to the soundcard so it can't be a slave). It would be really sweet to sync !
I know many people are happy with vdj as rewire master but I personally don't benefit from it at all (I route its signal through Ableton via soundflower and live needs access to the soundcard so it can't be a slave). It would be really sweet to sync !
+1
Posté Mon 24 Sep 12 @ 6:56 am
SBDJ
I have just tested MIDI clock on PC.
VDJ sends FA which is the sequence start for the timing clock, then F8 which are the actual clock messages, then FC which marks the end of the sequence, which is correct.
All I did to test this was to install LoopBe1, then used RTCS MIDI Sniffer to watch that port after selecting it in the registry tool.
VDJ sends FA which is the sequence start for the timing clock, then F8 which are the actual clock messages, then FC which marks the end of the sequence, which is correct.
All I did to test this was to install LoopBe1, then used RTCS MIDI Sniffer to watch that port after selecting it in the registry tool.
Posté Mon 24 Sep 12 @ 12:18 pm
groovindj
It does work on a PC. I've just confirmed MIDI sync from VDJ to:
A) an external device. I used an Akai MPC-1000
B) other software. I used Ableton Live. The MIDI was routed via LoopBe.
Windows 7 32 bit.
A) an external device. I used an Akai MPC-1000
B) other software. I used Ableton Live. The MIDI was routed via LoopBe.
Windows 7 32 bit.
Posté Mon 24 Sep 12 @ 1:53 pm
Secret Beats
SBDJ wrote :
I have just tested MIDI clock on PC.
VDJ sends FA which is the sequence start for the timing clock, then F8 which are the actual clock messages, then FC which marks the end of the sequence, which is correct.
All I did to test this was to install LoopBe1, then used RTCS MIDI Sniffer to watch that port after selecting it in the registry tool.
VDJ sends FA which is the sequence start for the timing clock, then F8 which are the actual clock messages, then FC which marks the end of the sequence, which is correct.
All I did to test this was to install LoopBe1, then used RTCS MIDI Sniffer to watch that port after selecting it in the registry tool.
groovindj wrote :
It does work on a PC. I've just confirmed MIDI sync from VDJ to:
A) an external device. I used an Akai MPC-1000
B) other software. I used Ableton Live. The MIDI was routed via LoopBe.
Windows 7 32 bit.
A) an external device. I used an Akai MPC-1000
B) other software. I used Ableton Live. The MIDI was routed via LoopBe.
Windows 7 32 bit.
Thank you both for confirming that it does indeed work for Windows users. The Macintosh user base still needs some love, however. Please help us, Atomix!
Posté Mon 24 Sep 12 @ 4:54 pm
Stretchincanada
so , im waiting to see what the final answer is to getting the entire thing to work as I had it working then over time the clock failed it was off mili sec but then grew over time. I would love to have something that has a direct link and a way so that I can see on the skin that the two are in sync like a two small led on the skin that blink so im not guessing and maybe a metro clock.
Posté Tue 25 Sep 12 @ 2:50 pm
Secret Beats
tycoonentertainmentcanada wrote :
so , im waiting to see what the final answer is to getting the entire thing to work as I had it working then over time the clock failed it was off mili sec but then grew over time. I would love to have something that has a direct link and a way so that I can see on the skin that the two are in sync like a two small led on the skin that blink so im not guessing and maybe a metro clock.
An in-software LED icon indicating the master tempo clock for MIDI output (a MIDI "heartbeat") definitely sounds like a great idea!
Posté Tue 25 Sep 12 @ 5:37 pm
pOpYDJ
So Please tell my how ill setup VDJ 7.0.5 as Midi Master -> Traktor Pro with F1 Controller?
What cable should ill use?
Thx
pOpY
What cable should ill use?
Thx
pOpY
Posté Fri 28 Sep 12 @ 9:16 am
groovindj
Why would you need to use two DJ programs at the same time?
Posté Fri 28 Sep 12 @ 9:36 am
pOpYDJ
I want to use the F1 Controller from NI which comes with Traktor as a Sampler.
Traktor should be stay in sync with VDJ Tracks.
Thats the reason.
http://www.thomann.de/gb/mobile_prod.html?AR=279998
Cu
pOpY
Traktor should be stay in sync with VDJ Tracks.
Thats the reason.
http://www.thomann.de/gb/mobile_prod.html?AR=279998
Cu
pOpY
Posté Fri 28 Sep 12 @ 11:15 am
groovindj
But you could just play the tracks in Traktor and use the F1....
Posté Fri 28 Sep 12 @ 11:25 am
pOpYDJ
nope, want to use VDJ ;) and sync to traktor, anybody tried this?
Posté Sat 29 Sep 12 @ 11:46 am
pOpYDJ
bump
Posté Wed 10 Oct 12 @ 10:40 am
groovindj
What's the problem? Have you actually tried to sync VDJ & Traktor?
Posté Wed 10 Oct 12 @ 11:45 am
pOpYDJ
Yep. Please, Read the posts above.
Which hardware should ill use to sync vdj to traktor?
Which hardware should ill use to sync vdj to traktor?
Posté Wed 10 Oct 12 @ 12:57 pm
groovindj
You don't need any hardware.
Posté Wed 10 Oct 12 @ 2:45 pm
pOpYDJ
VDJ & Traktor are on different Notebooks! Could you please describe how ill set up the two programms to sync it together?
Posté Wed 10 Oct 12 @ 4:05 pm
groovindj
Put them on the same computer and you can do it easily, without any hardware.
If you insist on making it hard for yourself, then you're going to need two MIDI interfaces - one for each computer.
If you insist on making it hard for yourself, then you're going to need two MIDI interfaces - one for each computer.
Posté Wed 10 Oct 12 @ 4:49 pm
SBDJ
Posté Wed 10 Oct 12 @ 5:25 pm
groovindj
Now that's cool!
Posté Thu 11 Oct 12 @ 2:53 am
