djdad
As of builds 2174.951 (or higher) the Numark NV is officially supported in VirtualDJ 8.
Operation Guide : http://www.virtualdj.com/documents/Numark%20NV%20-%20VirtualDJ%208%20Operation%20Guide.pdf
Numark's product page : http://www.numark.com/product/nv
Posté Wed 11 Mar 15 @ 12:40 pm
groovindj
Cool!
Those look like exactly the same screen images as the NV displays for Serato - so is that part of the NV firmware?
I was wondering if the screen data was embedded in the VDJ executable, or how the screens would be displayed when using different skins.
Those look like exactly the same screen images as the NV displays for Serato - so is that part of the NV firmware?
I was wondering if the screen data was embedded in the VDJ executable, or how the screens would be displayed when using different skins.
Posté Wed 11 Mar 15 @ 12:59 pm
djdad
the screens cannot be customized (they re embedded in firmware). Data sent via large sysex which update the status of the screens. So, yes the screens will look exactly like they do in Serato.
Posté Wed 11 Mar 15 @ 1:04 pm
A Man and His Music
I don't care how it was done, as long as it works. Great job team. Will give this controller a closer look.
Posté Thu 12 Mar 15 @ 4:28 am
Team Zebra
Will there be a new skin for this controller to tie in with the new mapper?
Posté Sun 15 Mar 15 @ 3:24 am
djdad
lol, i thought that the whole idea of this controller was to get rid of the laptop screen :)
A very basic-stripped down skin with large browser should suit best for the NV imo.
A very basic-stripped down skin with large browser should suit best for the NV imo.
Posté Sun 15 Mar 15 @ 6:27 pm
Hayward
Hi all, I have a Numark NV and downloaded the latest VDJ and tried using it. It seems to work well with VDJ for the most part except the screens are flip flopped. Meaning when you load a track to deck 1, the screen above deck 2 displays the track and all the related information. The transport keys (play/pause/platter) for deck 1 control the movement for the screen above deck 2.
Similarly, when you load a track to deck 2, the screen above deck 1 receives the information. Thanks for reading.
Similarly, when you load a track to deck 2, the screen above deck 1 receives the information. Thanks for reading.
Posté Fri 20 Mar 15 @ 7:04 am
thetracker510
Hayward wrote :
Hi all, I have a Numark NV and downloaded the latest VDJ and tried using it. It seems to work well with VDJ for the most part except the screens are flip flopped. Meaning when you load a track to deck 1, the screen above deck 2 displays the track and all the related information. The transport keys (play/pause/platter) for deck 1 control the movement for the screen above deck 2.
Similarly, when you load a track to deck 2, the screen above deck 1 receives the information. Thanks for reading.
Similarly, when you load a track to deck 2, the screen above deck 1 receives the information. Thanks for reading.
what is your system specs? is it windows 7 64bit?..I hope not....
Posté Tue 24 Mar 15 @ 9:23 pm
Hayward
what is your system specs? is it windows 7 64bit?..I hope not....
[/quote]
It is. HP Envy (Beats) i5 8 gigs of ram, 64bit.
Posté Thu 26 Mar 15 @ 12:07 pm
djdad
Goto Settings-->Controllers tab.
Make sure the 3 NV devices as assigned as followed...
Numark NV Left display -->Assigned to Decks (1,3 - Automatic)
Numark NV Right display -->Assigned to Decks (2,4 - Automatic)
Numark NV -->Assigned to Decks (1,2,3,4 - Automatic)
Note, that the Deck assignment should be automatically set as above on first launch. If that is not the case, then please either delete the settings.xml , relaunch and check the deck assignment again, or manually assign the decks as above.
Make sure the 3 NV devices as assigned as followed...
Numark NV Left display -->Assigned to Decks (1,3 - Automatic)
Numark NV Right display -->Assigned to Decks (2,4 - Automatic)
Numark NV -->Assigned to Decks (1,2,3,4 - Automatic)
Note, that the Deck assignment should be automatically set as above on first launch. If that is not the case, then please either delete the settings.xml , relaunch and check the deck assignment again, or manually assign the decks as above.
Posté Thu 26 Mar 15 @ 12:59 pm
Hayward
djdad wrote :
Goto Settings-->Controllers tab.
Make sure the 3 NV devices as assigned as followed...
Numark NV Left display -->Assigned to Decks (1,3 - Automatic)
Numark NV Right display -->Assigned to Decks (2,4 - Automatic)
Numark NV -->Assigned to Decks (1,2,3,4 - Automatic)
Note, that the Deck assignment should be automatically set as above on first launch. If that is not the case, then please either delete the settings.xml , relaunch and check the deck assignment again, or manually assign the decks as above.
Make sure the 3 NV devices as assigned as followed...
Numark NV Left display -->Assigned to Decks (1,3 - Automatic)
Numark NV Right display -->Assigned to Decks (2,4 - Automatic)
Numark NV -->Assigned to Decks (1,2,3,4 - Automatic)
Note, that the Deck assignment should be automatically set as above on first launch. If that is not the case, then please either delete the settings.xml , relaunch and check the deck assignment again, or manually assign the decks as above.
Thank you!
Posté Thu 26 Mar 15 @ 1:32 pm
DJchilles
Hey all!
Awesome job with the Support for the Numark NV, works great!
Thank you...
I have only one problem...
When I use too much the Effects (special the FlanJet) Crashes my Virtual DJ and the Program is closing.
It Crashes not always but some times.
PC is a Dell Studio 1747 with 8GB Ram and a i7 QuadCore
VirtualDJ Build is 2185.958
Is the problem known?
Awesome job with the Support for the Numark NV, works great!
Thank you...
I have only one problem...
When I use too much the Effects (special the FlanJet) Crashes my Virtual DJ and the Program is closing.
It Crashes not always but some times.
PC is a Dell Studio 1747 with 8GB Ram and a i7 QuadCore
VirtualDJ Build is 2185.958
Is the problem known?
Posté Sat 28 Mar 15 @ 7:23 pm
virtualdjbuda1
ksavage1981 wrote :
Will there be a new skin for this controller to tie in with the new mapper?
Has anyone heard if they're coming out with a Numark NV skin to coincide with VDJ8? One problem I'm experiencing with other skin(s) being used to operate the NV is for example; the "FILTER knob". When turning the knob it's mapped to some flanger/loop/effect which doesn't do what the control is designed for (filtering the bass/highs) to work somewhat similar to a kill switch. Is anyone else having this issue? If not, HOW can I map the (FILTER effect) knob to work on VDJ8 and with what skin? Thanks, Jimmy Z
Posté Thu 23 Apr 15 @ 11:02 pm
djdad
The Filter knob of the NV will simply work as a High/Low Pass Filter (same as the Filter on the skin) if the FILTER ROLL/FILTER FX button (mode) is OFF
Posté Fri 24 Apr 15 @ 3:47 am
virtualdjbuda1
djdad wrote :
The Filter knob of the NV will simply work as a High/Low Pass Filter (same as the Filter on the skin) if the FILTER ROLL/FILTER FX button (mode) is OFF
I have the FILTER ROLL/FILTER FX off and still does nothing? When I point over the button on the skin it indicates (OFF) but High/Low Pass Filter is inactive when turning left or right on the NV. The Touch button works like it should and so does the ROLL button when activated, and when turning these 2 off... the FILTER Knob does nothing. Is it possibly a setting to the FILTER that is mapped incorrectly?
Posté Fri 24 Apr 15 @ 4:52 pm
djdad
Are you using the default mapping ?
Can you try to restore to the factory settings just in case ? E.g. you can delete the settings.xml from Documents/VirtualDJ folder and re-launch.
If you try to apply the Filter from the Skin, does it work ??
Can you try to restore to the factory settings just in case ? E.g. you can delete the settings.xml from Documents/VirtualDJ folder and re-launch.
If you try to apply the Filter from the Skin, does it work ??
Posté Fri 24 Apr 15 @ 5:28 pm
virtualdjbuda1
virtualdjbuda1 wrote :
I have the FILTER ROLL/FILTER FX off and still does nothing? When I point over the button on the skin it indicates (OFF) but High/Low Pass Filter is inactive when turning left or right on the NV. The Touch button works like it should and so does the ROLL button when activated, and when turning these 2 off... the FILTER Knob does nothing. Is it possibly a setting to the FILTER that is mapped incorrectly?
djdad wrote :
The Filter knob of the NV will simply work as a High/Low Pass Filter (same as the Filter on the skin) if the FILTER ROLL/FILTER FX button (mode) is OFF
I have the FILTER ROLL/FILTER FX off and still does nothing? When I point over the button on the skin it indicates (OFF) but High/Low Pass Filter is inactive when turning left or right on the NV. The Touch button works like it should and so does the ROLL button when activated, and when turning these 2 off... the FILTER Knob does nothing. Is it possibly a setting to the FILTER that is mapped incorrectly?
Just got it to work!! So now working fine Thanks!! :)
Posté Fri 24 Apr 15 @ 5:39 pm
thetracker510
well I've found out I can't run my guitar in to vdj on the nv...and tried running Guitar Rig loopbe1 into a line in on vdj but the problem is incompatible drivers on one thing orthe other (having to use the laptops line in for guitar,then send that back to vdj?) so.let me ask again...why can you guys get a working input on the NV? and why has Numark not made Asio drivers for this?
Posté Sat 02 May 15 @ 3:11 am
djdad
The NV Inputs are hardware. So no software on the planet would be able to control/use them (both Line In and MIC Inputs)
Its not a matter of drivers, its a matter of the hardware design of the built-in sound card.
Its not a matter of drivers, its a matter of the hardware design of the built-in sound card.
Posté Sat 02 May 15 @ 6:33 am
thetracker510
"The NV Inputs are hardware",this would mean that those inputs should work regardless of the software ,right? makes no sense dad.why cant we intercept and input a line in the signal flow?
Posté Sat 02 May 15 @ 4:12 pm
