SHIFT (SECONDARY) ACTIONS SHIFTPress this button down to access secondary actions as described in the SHIFT ACTION column D LAYERSelect a deck for the unit to control
When a single device is connected or a 2 Decks skin is used , the SC6000M can be assigned to Left (A) or Right (B) Deck
When 2 devices are connected and a 4 Decks skin is used, the Left assigned device will toggle control for Left Decks (Deck A and C) and the Right-assigned device will toggle control for the Right Decks (B and D) 1 PLAYPlay-pause the trackPlay-stutter track2 CUEWhen track is paused, sets a temporary Cue point and previews track while pressed if the Cue is set. Jump and stop to the Cue point when track is playingJumps at the beginning of the track3 BEAT JUMPSeamlessly move track forward/backwards by the same amount of beats as the selected loop size. Fast seek through the track backwards/forward by 4 beats while pressed.4 TRACK SKIPLeft Track Skip : Jump to the beginning of the track. Double-press the same button to load the previous track from the Browser List.
Right Track Skip : Loads the next track from the Browser List 5 CENSOR Plays the track in reverse while pressed. When released, track will continue playing from the position it would have been if never used (CENSOR)Toggle between Reverse and Normal playback 6 LOOP INSets current position as the Start point (Loop In) of a manual loop. When in Loop, sets Jogwheel to Loop In Adjust mode and then use the Jogwheel to fine adjust the position of the Loop In point in time. 7 LOOP OUTSets current position as the End point (Loop Out) of a manual loop. When in Loop, sets Jogwheel to Loop Out Adjust mode and then use the Jogwheel to fine adjust the position of the Loop Out point in time. 8 LOOPHalf/double the size of the Loop in beats. Push to enable an auto-loop of the selected size in beats or push to exit the loop.When in Loop, turn to move the loop backwards/forward by 1 beat 9 JOGMotor wheel to scratch (if Motor mode is selected) or pitch bend. Loop In and Loop Out point adjustment (see Loop In/Out controls above)
The colored ring around the motor wheel will get the color of the assigned deck. 10 SHORTCUTSShow/Hide the Pads-Sampler-Custom buttons panel 11 SOURCEOffers a confirmation panel on the SC6000M screen to switch to Standalone mode 12 VIEWToggles between Normal Deck and Browser+Mini Deck views on the SC6000M screen.
Hold down for more than 1 second to open the SETTINGS view on the SC6000M screen. 10 EJECTUnload Track from Deck. 14 DISPLAYSee Screen for further details 15 BACKSets Browser focus to Folders list. If focus is on Folders, open/close sub-folders 16 FWDCycles focus between available Browser Lists (folders, Songs, Sideview) 17 BROWSEScrolls through Files and Folders in the focused Browser list.
Push to get the Browser view. When in Browser view, pus to load the selected track to the Deck.
Double-fast-push to clone the Track (and its position and playback status) from the other DeckCycle through the available lists of Sideview (Automix, Sidelist, Karaoke, Sampler and Shortcuts).
Push to add the selected track of Songs List to the selected List of Sideview (Automix, Sidelist, Karaoke) 18 TORGUE ADJUSTAdjust the torgue of the motor wheel 19 STOP TIMEAdjust the time the track will need to completely stop. Set to Min for instant stop 20 MOTOREnable/disable Motor 21 SYNCMatch the corresponding Deck's tempo and phase with the opposite Deck's (or the Master Deck’s if using a 4 decks Skin) tempo and phase 22 MASTERManually set this deck as Master Deck. 23 KEYLOCKLock the track's key to its original value regardless the track's Tempo changes.Smoothly reset Track's tempo to its original value 24 PITCHAdjust the track's playback speed (tempo). When pitch fader is at the middle position (track is playing at its original speed), the white center LED will be lit.
When the green-arrow LEDs are lit, the pitch fader has to be moved to the direction the arrows indicate, in order to catch the pitch value of the deck. This is mostly happening when decks are swapped (via the LAYER button) and the pitch value of one deck is different than the other.
Note that this Hardware-takeover is not following the soft-takeover of VirtualDJ, meaning that if SHIFT is pressed, the arrows will not indicate the direction the pitch fader needs to be moved to in order to re-gain pitch control, but the ghost-fader on the GUI will be an aid 25 SLIPEnable/disable Slip mode. When enabled, several actions like scratching, Hotcues, Loops etc will act temporary, and the track will resume playing from the position it would have been if the action was never triggered. 26 PITCH BENDHold down to temporary speed up/slow down the song while pressed. When released, the track playback will return to the speed designated by the Pitch Fader.Select the previous/next available % range of the Pitch Fader 27 PAD MODESSet Pads to a Pads page.
HOTCUE: Hotcues page (1st press), CueLoop page (2nd press)
LOOP : Loop page (1st press), Saved Loops page (2nd press)
ROLL : Loop Roll page (1st press), KeyCue page (2nd press)
SLICER : Slicer page (1st press), Sampler page (2nd press)
See further details in VirtualDJ Manual - Pads 28 PARAMETERAdjust the 1st Parameter of the selected Pads pageAdjust the 2nd Parameter of the selected Pads page 29 PADSFunctionality depends on the selected Pads page.
See further details in VirtualDJ Manual - Pads Functionality depends on the selected Pads page.
See further details in VirtualDJ Manual - Pads Rear panel