Hardware Manuals


Numark - 4TRAK  

FRONT & REAR PANELS





NAME

DESCRIPTION

64 CF CURVE
Adjust the slope of the crossfader curve (from smooth to cut/scratch)
65 FADER START
turn Fader Start On/off. When enabled, left/right deck will start playback as soon as its Volume fader is moved from the minimum position
66 CF ASSIGN
Assign each Mixer Channel to the Left (A) / Right (B) side of the crossfader or THRU (middle position)
67 HEADPHONES MIX
Blends audio signals in the Headphones channel between the Master Output (when in maximum position) and the Channels that have PFL enabled (when in minimum position)
68 HEADPHONES SPLIT
When turned on, Master Output will be routed to one side of the Headphones and the Mixer Channels that have PFL enabled to the other
69 HEADPHONES GAIN
Adjust the Volume level of the Headphones channel
70 HEADPHONES SOCKET
Connect your headphones using the 1/4" or the 1/8" socket





NAME

DESCRIPTION

71 POWER
Connect the provided AC Adapter. Use the power button to power the unit on, after all connections have been made
72 USB
Connect the unit with your computer via a USB port using the provided USB cable
73 MASTER OUTPUT (XLR)
Master Output (Balanced). Connect your amplifier or amplified speakers using XLR connectors/cables. The Volume of the Master Output is controlled from the top panel
74 MASTER OUTPUT (RCA)
Master Output (Un-balanced). Connect your amplifier or amplified speakers using common RCA connectors/cables. The Volume of the Master Output is controlled from the top panel
75 BOOTH OUTPUT (RCA)
Booth Output (alternative output, mostly used for connecting a dj-monitor)
76 INPUTS
Connect your analogue sources for each Channel mixer. Channels 2 and 3 can take Line/Phono Inputs. Channels 1 and 4 can take Line or Microphone Inputs. Set the switchers to the appropriate position depending on the connected source






For further Technical features and specifications, visit

Numark 4TRAK
Product's Page







Hardware Integration Department
2016 - ATOMIX PRODUCTIONS



Reproduction of this manual in full or in part without written permission from Atomix Productions is prohibited.