Hardware Manuals


Numark - NDX 500  

Configuration


Connections



  • Connect the NDX500 with a USB port of your computer using the provided USB cable.
  • Use a pair of RCA cables to connect each NDX Output to an Input Channel of a mixer. Any analogue or digital mixer can be used.
  • Connect your amplifier or amplified speakers to the Master Output of a mixer
  • Power on the NDX500 your mixer and your amplifier.
  • Set the NDX500 to MIDI mode using the SOURCE buttons.


Firmware & Drivers


No drivers are required to be installed for the NDX500. The NDX500 is a USB class-compliant and your Operation system (Windows or Mac) will auto-install the necessary drivers and will auto-detect the NDX500 as a Midi device with built-in Audio interface.

Check Numark webpage of any firmware update and make sure your units run the very last version.
http://www.numark.com/product/ndx500

VirtualDJ 8 Setup


Download and install VirtualDJ 8 from http://www.virtualdj.com/download/index.html (in case you have not done already)

Once VirtualDJ 8 is opened, a Login Window will appear. Login with your virtualdj.com account.

A Pro Infinity or a Subscription License is required to use the Numark NDX500 with VirtualDJ 8. Without any of the above Licenses, the controller will operate for 10 minutes each time you restart VirtualDJ 8.
http://www.virtualdj.com/buy/index.html


A detection window will appear next verifying the proper connection.

Click on the Use Soundcard button and VirtualDJ will automatically apply the necessary Audio configuration.

Click OK.


The unit is now ready to operate.

MIDI Operation


The unit should be visible in the CONTROLLERS tab of Config and the “factory default” available/selected from the Mappings drop-down list.
The factory default Mapping offers the functions described in this Manual, however those can be adjusted to your needs via VDJ Script actions.



Note. Each NDX500 unit (if more than 1 is connected) will be additionally displayed in this window, and any modifications in the mapping file will affect all units.

Find more details at http://www.virtualdj.com/wiki/VDJ8script.html


AUDIO Setup


The unit has a pre-defined Audio setup and a special button in the AUDIO tab of Config to provide that.





Refer to the manual of the unit for further features and setups.
http://www.numark.com/images/product_downloads/NDX500-UserGuide-v1.1.pdf

For further VirtualDJ settings and features please refer to the User Guide of VirtualDJ 8.
http://www.virtualdj.com/manuals/virtualdj8/index.html

Contrôles