Hardware Manuals


Pioneer DJ - DJM-850  

Configuration avancée


The Pioneer DJM-850 offers a built-in audio interface with 4 stereo Outputs and 4 stereo Inputs. The Inputs are determined by the Input Select switchers at the top panel of the unit.
The USB Output Channels can be set to different modes via the Pioneer DJM-850 Setting Utility (automatically opens when the DJM-850 is connected to a USB port of your computer)

How to manually open:

For Windows computer:
Click [START] menu [All Programs] [Pioneer] [DJM-850] [Pioneer DJM-850 Settings Utility]

For Mac OSX computer:
Click [MACINTOSH HD] icon [Applications] [Pioneer] [DJM-850] [Pioneer DJM-850 Settings Utility]


Timecode (DVS)


VirtualDJ is offering DVS (Digital Vinyl System) support for the Pioneer DJM-850. A Timecode Plus or Pro Infinity license is required. http://www.virtualdj.com/buy/index.html
Up to 4 Timecode Inputs are available to control any software decks via Timecode CDs or Vinyls.

Mixer Channels CH1 and CH4 can accept PHONO (Timecode Vinyls). CD/LINE (Timecode CDs) can be accepted in all 4 available Channels.
Connect your Timecode devices at the rear panel of the Pioneer DJM-850 to the Inputs 1 to 4 and make sure the Input switchers at the top panel are set to USB position.

Open the Pioneer DJM-850 Setting Utility and set the USB Channel Outputs to the appropriate mode.

In this example (as shown in the side picture), 2 Timecode Vinyls (turntables) have been connected to CH1 and CH2 and 2 Timecode CDs have been connected to Ch2 and CH3

Close the Settings Utility


Open the AUDIO tab of VirtualDJ Settings and click on the TIMECODE button. By default VirtualDJ will auto-create 2 Timecode Inputs. Add 2 more Timecode Input lines and select the appropriate Input Channels as per the image below


Pioneer DJM-850 – Audio Setup with 4 Timecode Inputs


Click to APPLY.

Press PLAY on your timecode CD and/or Vinyl device and VirtualDJ will automatically detect your Timecode type and make the appropriate adjustments for best performance.

Open the TIMECODE tab of the VirtualDJ Settings and choose the CALIBRATE button if for any reason the signal is not detected (possibly due to reversed phase connections).

Click on the ON buttons from the TIMECODE panels of the Default Skin (in the SCRATCH center panel) to enable the Timecode control to any of the 4 software decks.


Timecode Detection


Timecode buttons - 4 Decks GUI (Scratch Panel)


In this example, 2 Timecode Inputs have been connected to CH2 and CH3 at the rear panel of the Pioneer DJM-850.

If any of the available USB Output is not used, choose None from the list.

REC OUT has been chosen for CH4 in this example. See Recording.



Pioneer DJM-850 - Audio Setup with 2 Timecode Inputs


Recording


Any of the 4 available USB Output Channels of the Pioneer DJM-850 can be used to record your Main Mix along with Microphone Inputs.

  • Open the DJM-850 Setting Utility and set any of the 4 USB Outputs as REC OUT.

    In this example, USB7/8 (CH4) has been selected as Recording Output.



  • Open the AUDIO tab of VirtualDJ Settings and manually add a “record” line to your current audio configuration. Select the PIONEER DJM-850 sound card and the same Input Channels from the Setting Utility (in this case IN 7&8), as per the following image.


    Pioneer DJM-850 - Audio Setup with Record line


  • Click to APPLY

  • Open the MASTER center panel of the VirtualDJ GUI and click to the REC button (or BCAST for broadcasting) to record your mix.


Mixer Order


By default Pioneer DJM-850 is pre-configured to control VirtualDJ decks with order 3-1-2-4. This means that the middle CH2 and Ch3 are assigned to control main decks 1 and 2 and the side Channels CH1 and CH4 are assigned to control VirtualDJ decks 3 and 4.

How to change the Mixer channel order?
  • Click on the small round button right above the Crossfader (Mixer Options) to get the Mixer Options menu. (available in the 4 Decks default GUI of VirtualDJ)

  • Choose one of the available mixer orders 1-2-3-4, 3-1-2-4 (default) or 1-3-4-2

  • If the sound card of the Pioneer DJM-850 is used in the Audio setup, confirm the change of the audio routing in the following window and VirtualDJ will automatically make the necessary changes to the audio configuration.










Hardware Integration Department
2016 - ATOMIX PRODUCTIONS



Reproduction of this manual in full or in part without written permission from Atomix Productions is prohibited.