Connections & Options

KEY

ACTION

10 POWER SWITCH

Switches ON/OFF the power of the unit.
Please make the necessary connections for the unit to perform before you switch power on

11 IEC POWER CONNECTOR

Connect the supplied IEC power cable

12 MOTOR TORQUE

Select the desired Torque for the motor between High and Low

13 USB CONNECTOR

Use a standard USB cable to connect the unit on a USB port on your computer.
If you also have a Rane Seventy-Two you can connect the USB cable on the USB hub on the rear side of Seventy-Two.

Motorwheel Options

VirtualDJ offers a few special options regarding controllers like Rane Twelve that feature motorized platter.
You can find these options by opening VirtualDJ settings, clicking on "Options" icon on the left, and typing "motor" on the search box on the top.

OPTION

DESCRIPTION

MotorWheelInstantPlay

When this option is enabled (default setting) VirtualDJ ignores the ramp up time of the platter when you start the playback of a track. This means that the playback is instant as you would expect from a controller with non-motorized platters.
The draw back of this setting is that until the platter reaches it's full speed you can't hold the deck by holding the platter as you would do on a traditional turntable.
If you want to be able to hold the deck immediately after you press play to start playback, or you prefer to have the deck start with a ramp up sound then you can disable this option.
Attention: MotorwheelInstantPlay setting only affects starting the deck by PLAY button. Starting the deck by HOTCUE buttons is always instant (VirtualDJ always ignores the ramp up time of the platter)

MotorWheelSmoothPercent

This setting helps smoothing the motorized platter speed against fluctuations due to OS delays in receiving the MIDI messages.
This is an advanced setting that you should not alter unless you have issues and support team asks you to do so

MotorWheelLockTime

Controls the number of seconds that VirtualDJ waits for the platter to speed up or stop completely when you start/stop a deck. When MotorWheelInstantPlay is disabled, this setting affects only the stop time.

For further Technical features and specifications, visit
Rane Twelve
Product's Page

Hardware Integration Department 2019 - ATOMIX PRODUCTIONS

Reproduction of this manual in full or in part without written permission from Atomix Productions is prohibited.