thebamboo
When I plug my USB Splitter into my macbook pro, Cue will not play on either side. Any help?
Posté Sun 23 Dec 07 @ 9:49 am
sbangs
what sound options do you choose
that will have terribly high latency
that will have terribly high latency
Posté Sun 23 Dec 07 @ 1:02 pm
thebamboo
DJ IO split to run on my mixer.
My set up is as follows"
Macbook Pro
Total Control
DJ Io
I am trying to connect a mouse.
My set up is as follows"
Macbook Pro
Total Control
DJ Io
I am trying to connect a mouse.
Posté Sun 23 Dec 07 @ 6:27 pm
sbangs
you should set
inputs : none
output : headphones
card : asio
driver : dj /io
inputs : none
output : headphones
card : asio
driver : dj /io
Posté Sun 23 Dec 07 @ 6:59 pm
thebamboo
I do not have the asio option.
Am I missing something?
Am I missing something?
Posté Wed 26 Dec 07 @ 9:59 pm
sbangs
what options are available to you ?
try configuring with a 4.1
inputs : none
outputs : headphones
card : 4.1
driver : dj/1o
try configuring with a 4.1
inputs : none
outputs : headphones
card : 4.1
driver : dj/1o
Posté Thu 27 Dec 07 @ 5:18 am
DJ Cyder
are you using tiger because the djio currently does not work with leopard.
Posté Thu 27 Dec 07 @ 10:05 am
thebamboo
Not using leopard.
I had it working, then went to change a skin, that was it.
Not sure what is going on.
The only thing I can do is dump the program in the trash then reinstall.
But nothing has helped.
I had it working, then went to change a skin, that was it.
Not sure what is going on.
The only thing I can do is dump the program in the trash then reinstall.
But nothing has helped.
Posté Thu 27 Dec 07 @ 3:18 pm
thebamboo
Sky,
That is exactly what I am doing.
That is exactly what I am doing.
Posté Thu 27 Dec 07 @ 3:19 pm
thebamboo
I just trued version 4.3 and the exact same thing happened.
Posté Thu 27 Dec 07 @ 3:23 pm
MorganNumark
ASIO doesn't exist in mac, apple functions on Core Audio, totally different.
To make DJ I/O work properly you need to set the card to 4.1
DJ I/O functions on USB 2.0, if you do not have a USB 2.0 hub and USB 2.0 cable, your DJ I/O will not function properly.
Further more having a powered hub adds more stability if not piece of mind.
The best option is to never run your sound card on a hub. If you have to, well then you have to, but avoiding it is better off.
Also on your mac, if 15"pro/powerbook or above, you should use the left port, which is tied directly to motherboard (port on the right is bussed).
If on a macbook, the front most port is the equivalent.
It's hard to use all these devices, I run into it all the time, so a powered USB 2.0 is your best bet.
To make DJ I/O work properly you need to set the card to 4.1
DJ I/O functions on USB 2.0, if you do not have a USB 2.0 hub and USB 2.0 cable, your DJ I/O will not function properly.
Further more having a powered hub adds more stability if not piece of mind.
The best option is to never run your sound card on a hub. If you have to, well then you have to, but avoiding it is better off.
Also on your mac, if 15"pro/powerbook or above, you should use the left port, which is tied directly to motherboard (port on the right is bussed).
If on a macbook, the front most port is the equivalent.
It's hard to use all these devices, I run into it all the time, so a powered USB 2.0 is your best bet.
Posté Thu 27 Dec 07 @ 4:57 pm
thebamboo
Thanks.
I have now figured it out to be a DJ IO issue.
I have downloaded the latest update, I made a difference. Still not the best, but I will try a powered hub.
Thanks for all of your help.
I am really becoming a fan of this software!
I have now figured it out to be a DJ IO issue.
I have downloaded the latest update, I made a difference. Still not the best, but I will try a powered hub.
Thanks for all of your help.
I am really becoming a fan of this software!
Posté Thu 27 Dec 07 @ 10:10 pm
sbangs
is the card detected by osx?
1. Open finder
2. Select Applications
3. Open Numark USB Audio Panel
4. Confirm Status says "Connected".
1. Open finder
2. Select Applications
3. Open Numark USB Audio Panel
4. Confirm Status says "Connected".
Posté Fri 28 Dec 07 @ 4:59 am
thebamboo
It was a DJ IO problem.
Fixed, all is great!
Fixed, all is great!
Posté Sun 13 Jan 08 @ 9:50 pm
k_one
could you explain what the problem was? would be nice if other users run into the same problem in the future...
Posté Mon 14 Jan 08 @ 5:59 am
thebamboo
The driver I was using was not updated.
I downloaded the newest driver from the Numark site.
I downloaded the newest driver from the Numark site.
Posté Tue 15 Jan 08 @ 12:47 pm