IOWADJdotcom
I hate to repeat posts, but I haven't been able to locate a post that has helped me up to this point. I recently switched from CDJ's to Technic 1200's w/ the stock VV vinyl timecodes.
When mixing live, I have no problems at all with drops or my latency etc until I heavily scratch in a track.
However, when I scratch heavily - the opposite channel will tend to skip. This typically only happens when I rapidly scratch. Does anyone have any insight on what I can start doing to trouble shoot?
I've experimented alot with the performance / latency settings but nothing seems to be resolving this problem. My timecode configuration is generally set to the autoconfigure option.
My performance settings are generally set up as:
Latency: 64 - 256 been experimenting with these mainly
Sratch optimized for Quality
Simple Algorithm
Basic Interpolation
Fast Master Temp
I actually have viewed the "advanced timecode view" when scratching live and the signal in the opposite deck drops out to 0% when I scratch heavily.
I hate to sound like a newbie, b/c I've been using VV for over a year without a problem - but the switch from CDJS to vinyl is giving me a headache!
The specs on my cpu are 2.4ghz dual core intel processor, XP, 3g ram.
Thanks in advance!
When mixing live, I have no problems at all with drops or my latency etc until I heavily scratch in a track.
However, when I scratch heavily - the opposite channel will tend to skip. This typically only happens when I rapidly scratch. Does anyone have any insight on what I can start doing to trouble shoot?
I've experimented alot with the performance / latency settings but nothing seems to be resolving this problem. My timecode configuration is generally set to the autoconfigure option.
My performance settings are generally set up as:
Latency: 64 - 256 been experimenting with these mainly
Sratch optimized for Quality
Simple Algorithm
Basic Interpolation
Fast Master Temp
I actually have viewed the "advanced timecode view" when scratching live and the signal in the opposite deck drops out to 0% when I scratch heavily.
I hate to sound like a newbie, b/c I've been using VV for over a year without a problem - but the switch from CDJS to vinyl is giving me a headache!
The specs on my cpu are 2.4ghz dual core intel processor, XP, 3g ram.
Thanks in advance!
Posté Tue 17 Feb 09 @ 12:53 am
VanStino
Try setting your scratch quality to latency. Also: put all your quality settings as low as possible to see if that fixes something.
Posté Tue 17 Feb 09 @ 3:35 am