Haui70
Hi guys or girls,
i have a strange situation and don't know how to handle.
When I connect my 2 NDX800 via USB to my MBP and set the player to USB Midi mode, only one the NDX800s LED ring is working.
The other one (LED ring) is dead.
It is only the LED ring around the platters which is not working, all other LEDs (Buttons etc.) is working fine.
They are assigned to Deck 1 and Deck 2 on mapper side ;-)
When I’m on CD Mode, each LED ring is working.
The firmware is up-to-date ;-)
Can anybody confirm this and is there a solution or is there a bad karma on my Mac?
PS: Used with 7.0.4 (native mapper & definition file)
Thx
i have a strange situation and don't know how to handle.
When I connect my 2 NDX800 via USB to my MBP and set the player to USB Midi mode, only one the NDX800s LED ring is working.
The other one (LED ring) is dead.
It is only the LED ring around the platters which is not working, all other LEDs (Buttons etc.) is working fine.
They are assigned to Deck 1 and Deck 2 on mapper side ;-)
When I’m on CD Mode, each LED ring is working.
The firmware is up-to-date ;-)
Can anybody confirm this and is there a solution or is there a bad karma on my Mac?
PS: Used with 7.0.4 (native mapper & definition file)
Thx
Posté Thu 09 Jun 11 @ 7:26 am
Haui70
Really no one here with NDX800s?
Posté Fri 15 Jul 11 @ 7:05 am
RC Sonorisation
I have this "problem" me to. I hope someone found a solution.
Posté Mon 18 Jul 11 @ 4:54 pm
Haui70
Hi,
if you use the default mapper and definition, please try to disable "Use HID devices"
After that, shut down VDJ!
Setup the NDXs to Midi Mode and launch VDJ again!
Check if you have done the Deck assigment at VDJ Config - Mapper
http://www.virtualdj.com/wiki/Decks%20inverted%20on%20MIDI%20controller.html
Let me know if it will work then.
if you use the default mapper and definition, please try to disable "Use HID devices"
After that, shut down VDJ!
Setup the NDXs to Midi Mode and launch VDJ again!
Check if you have done the Deck assigment at VDJ Config - Mapper
http://www.virtualdj.com/wiki/Decks%20inverted%20on%20MIDI%20controller.html
Let me know if it will work then.
Posté Tue 19 Jul 11 @ 2:56 am
RC Sonorisation
I have again this problem after that. I disable HDI device and it's the same. One of ring don't work.
Posté Tue 19 Jul 11 @ 3:50 am
RC Sonorisation
One of my platter is in NCSX2_028' and the other is in NCSX_029'. Maybe the problem come from there?
Posté Tue 19 Jul 11 @ 4:58 am
RC Sonorisation
still no solution? thank
Posté Wed 20 Jul 11 @ 3:32 am
Haui70
Funny, it is still back on my side :-(
Ok, but glad i'm not alone.
I have some questions to crosscheck it with mine ;-)
> Can you tell me what else beside your NDX800 you have connected to your Mac?
> Have you changed the Mapper or written a own definition file?
Ok, but glad i'm not alone.
I have some questions to crosscheck it with mine ;-)
> Can you tell me what else beside your NDX800 you have connected to your Mac?
> Have you changed the Mapper or written a own definition file?
Posté Wed 20 Jul 11 @ 4:31 am
RC Sonorisation
^^of course :
> Can you tell me what else beside your NDX800 you have connected to your Mac?
I connect my two NDX800 in midi on HUB to VDJ. I use the sound card of my 4MX and so, i use de output 1/2 and 3/4 of this controler.
my config in VDJ is :
Line in : None
Output : External mixer
Sound card : Hercules 4MX (with the picture of the 4MX)
> Have you changed the Mapper or written a own definition file?
I changed nothing. Like the NDX800 is native to VDJ I just plug and play.
> Can you tell me what else beside your NDX800 you have connected to your Mac?
I connect my two NDX800 in midi on HUB to VDJ. I use the sound card of my 4MX and so, i use de output 1/2 and 3/4 of this controler.
my config in VDJ is :
Line in : None
Output : External mixer
Sound card : Hercules 4MX (with the picture of the 4MX)
> Have you changed the Mapper or written a own definition file?
I changed nothing. Like the NDX800 is native to VDJ I just plug and play.
Posté Wed 20 Jul 11 @ 7:24 am
Haui70
Sorry, at the moment i have no solution for you and me ;-)
But it is reported and so we have to wait till it is solved :-)
But it is reported and so we have to wait till it is solved :-)
Posté Thu 21 Jul 11 @ 9:48 am