johnblaze94
Setup:
Hercules 4-MX
Hercules driver package 2.87
OSX 10.6.8
VDJ Pro Full 7.0.4
When i am playing tracks on decks A and B, i am not able to preview track C without it playing through the PA, and the stop buttons dont work. If if disable the crossfader, i can just use it like a mixer with only two volume controls and no crossfader, but the stop buttons work
The situation kind of makes the controller worthless. Why have a crossfader and 4 deck controll, if you can really use them. Basically im stuck with a 2 deck controller with lots of fancy lights.
Hercules 4-MX
Hercules driver package 2.87
OSX 10.6.8
VDJ Pro Full 7.0.4
When i am playing tracks on decks A and B, i am not able to preview track C without it playing through the PA, and the stop buttons dont work. If if disable the crossfader, i can just use it like a mixer with only two volume controls and no crossfader, but the stop buttons work
The situation kind of makes the controller worthless. Why have a crossfader and 4 deck controll, if you can really use them. Basically im stuck with a 2 deck controller with lots of fancy lights.
Posté Thu 04 Aug 11 @ 9:17 pm
DJ Phatso
Why don't you just lower the level controls on Deck C&D before playing the song ?
You could also use the prelisten function of VDJ and assign it to a key if you don't want to play around with the level.
As for the Stop buttons, do you mean they do not work for the additionnal deck (C&D) or at all in VDJ ?
if the later, then can you
a) check in the Mapper tab that the Stop functions is actually assigned
b) test them outside of VDJ, following this procedure:
http://ts.hercules.com/faqs/eng/her_eng_00414.pdf
You could also use the prelisten function of VDJ and assign it to a key if you don't want to play around with the level.
As for the Stop buttons, do you mean they do not work for the additionnal deck (C&D) or at all in VDJ ?
if the later, then can you
a) check in the Mapper tab that the Stop functions is actually assigned
b) test them outside of VDJ, following this procedure:
http://ts.hercules.com/faqs/eng/her_eng_00414.pdf
Posté Fri 05 Aug 11 @ 9:41 am
johnblaze94
Thanks for the tips.
The stop buttons seem to not work at all as long as the crossfader is enabled in the VDJ config. If i disable the crossfader in the config, they work as you would expect.
The problem i have is that when i start deck C while A is playing. To kill A, i have to match the slider to the current level. So when i pass it even a little bit, the volume jumps up, and then goes down with the fader.
As far as i can remember, it worked better with my old RMX. From what i remember, i could preview deck c without it playing over deck a. I havent had a chance to hook it up and test exactly yet. That's my next plan for the weekend.
The stop buttons seem to not work at all as long as the crossfader is enabled in the VDJ config. If i disable the crossfader in the config, they work as you would expect.
The problem i have is that when i start deck C while A is playing. To kill A, i have to match the slider to the current level. So when i pass it even a little bit, the volume jumps up, and then goes down with the fader.
As far as i can remember, it worked better with my old RMX. From what i remember, i could preview deck c without it playing over deck a. I havent had a chance to hook it up and test exactly yet. That's my next plan for the weekend.
Posté Fri 05 Aug 11 @ 7:10 pm