djfofr
Hi, Please help
I bought XDJ-RX & license VirtualDJ 8.1
PC communication was a problem. I installed the new firmware from 1.8 to 2.10 in XDJ-RX.
1. In the PC run VirtualDJ 8.1
2. Turn Pioneer XDJ-RX
3. Press MIDI
4. Press the left arrow
5. Press the right arrow
6. mix is NO activated: - (((( 2 deck1 and yes, they are active
I am doing something wrong?
Thank you very much for any good advice
I bought XDJ-RX & license VirtualDJ 8.1
PC communication was a problem. I installed the new firmware from 1.8 to 2.10 in XDJ-RX.
1. In the PC run VirtualDJ 8.1
2. Turn Pioneer XDJ-RX
3. Press MIDI
4. Press the left arrow
5. Press the right arrow
6. mix is NO activated: - (((( 2 deck1 and yes, they are active
I am doing something wrong?
Thank you very much for any good advice
Posté Thu 23 Jun 16 @ 10:17 am
nhudinhhai82
i want set up can you help me? thanks so much....
Posté Thu 23 Jun 16 @ 10:33 am
djdad
You will also need to install this .. http://www.virtualdj.com/plugins/index.html?category=other&search=pioneer+xdj (available for Pro users only)
Posté Thu 23 Jun 16 @ 10:34 am
djfofr
djdad wrote :
You will also need to install this .. http://www.virtualdj.com/plugins/index.html?category=other&search=pioneer+xdj (available for Pro users only)
I'm in XDJ-RX
Posté Thu 23 Jun 16 @ 10:36 am
PhantomDeejay
You also need to change MIXER MODE on the pic above to SOFTWARE (or whatever the other choice is)
With firmware 2.1 at this moment you can't use XDJ-RX with it's own hardware mixer (MIXER MODE XDJ-RX)
With firmware 2.1 at this moment you can't use XDJ-RX with it's own hardware mixer (MIXER MODE XDJ-RX)
Posté Thu 23 Jun 16 @ 12:40 pm
djfofr
PhantomDeejay wrote :
You also need to change MIXER MODE on the pic above to SOFTWARE (or whatever the other choice is)
With firmware 2.1 at this moment you can't use XDJ-RX with it's own hardware mixer (MIXER MODE XDJ-RX)
With firmware 2.1 at this moment you can't use XDJ-RX with it's own hardware mixer (MIXER MODE XDJ-RX)
GOOD golden man very much and thank you, awesome, after a sleepless night, I am very happy for your help - it works !!!!!
buttons are functional !!!! and the display lights up the entire controller.
but it is another problem:
no sound from XDJ-RX is not heard in the headphones, the master and the master LED is dead.
is there any chance again? Please?
Posté Thu 23 Jun 16 @ 2:33 pm
PhantomDeejay
On VirtualDj sound configuration you need to use "Master + Headphones" sound setup.
Also the "Master" VU-meter is hardware controlled and it takes into account the Master Volume knob.
Also the "Master" VU-meter is hardware controlled and it takes into account the Master Volume knob.
Posté Thu 23 Jun 16 @ 11:01 pm
DJ Marcelo Leme
my not turn on the lights of channels, not light play / cue, does not the light from the center of the jog, hotcue lights do not work, my license is Pro and this link above leads me to the virtual screen but nothing happens ...
Posté Fri 01 Jul 16 @ 12:30 am
djdad
Posté Fri 01 Jul 16 @ 3:16 am
djfofr
PhantomDeejay wrote :
On VirtualDj sound configuration you need to use "Master + Headphones" sound setup.
Also the "Master" VU-meter is hardware controlled and it takes into account the Master Volume knob.
Also the "Master" VU-meter is hardware controlled and it takes into account the Master Volume knob.
Although late, but thank you very much , it helped. Broken were headset . Now, after updating to VDJ8.2 already work with headphones. I would welcome a community that gives advice . thank you very much
Posté Wed 06 Jul 16 @ 3:24 pm
djfofr
Update 8.2 b3523 and I have a problem with the headphones. not select channel (L -R player) button is lit at one and can not turn off.
Please help. goes back to install the earlier update?
Please help. goes back to install the earlier update?
Posté Fri 30 Dec 16 @ 7:34 pm
klausmogensen
djfofr wrote :
Please help. goes back to install the earlier update?
You can get older builds here:
http://www.virtualdj.com/download/build.html
Posté Fri 30 Dec 16 @ 8:00 pm
djfofr
- It did not help :-(
- Wrong setting?
- Virtual DJ active button Headphones - CLICK lights on XDJ-RX receiver (CH1N or CH2) but the sound comes from a speaker output
- Press the button on XDJ-RX (CH1 and CH2) react not light nor sound
- Wrong setting?
- Virtual DJ active button Headphones - CLICK lights on XDJ-RX receiver (CH1N or CH2) but the sound comes from a speaker output
- Press the button on XDJ-RX (CH1 and CH2) react not light nor sound
Posté Sat 31 Dec 16 @ 9:04 am
djfofr
setting is correct? Please
Posté Sat 31 Dec 16 @ 9:42 am
Adion
As you can see in the first screenshot, the XDJ WASAPI interface only has 2 channel output (2o at the end) so it can't be used for 4 channels (1&2 master, 3&4 headphones) as you configured it.
The correct way is probably to have both lines selected as ASIO, and the first one on channels 1&2, the second one on channels 3&4
The correct way is probably to have both lines selected as ASIO, and the first one on channels 1&2, the second one on channels 3&4
Posté Sat 31 Dec 16 @ 10:25 am
djdurancol
el ajuste corrector es en la maquina xdj-rx Presionar menu ir a modo mixer y escoger mixer midi presionando sobre el debe cambiar de mixer mode MIXER XDJ-RX A MIXER MODE MIDI Y LISTO ILUMINARAN TODO
Posté Tue 14 Feb 17 @ 5:19 am