Hey, I'm sorry if this seems like a stupid question, but I've searched and haven't found much info in the forums or on the website about the 900 Nexus 2, and what I have found confused me a little. Maybe someone can look at the conflicting data I found searching below.
In the meantime any real world experience with it would be helpful. I have a gig lined up next week and they have an house set of turntables and a 900 NXS2, I normally play on an S9 or a 62, and I could probably bring one of my mixers and switch it out if I had to, but I was wondering if the 900 NX2 would work with DVS out of the gate or if it was tricky to configure. I can get there a little early, but I don't want to be having a bunch of issues or waste time with it onsite if there are known issues. Thanks....
Like this page shows the DJM 850 and the S9 http://virtualdj.com/manuals/hardware/pioneer/index.html
At the bottom it says the 900 NXS is supported, but doesn't say anything about the NXS2
Ironically, on this page it shows different info: http://virtualdj.com/products/hardware.html?brand=pioneer
It shows the 900 NXS with a graphic and everything, but DOES NOT even show the S9 AT ALL, which I thought was interesting.
But that second link doesn't say anything about the NXS2 either.
I found this OLD forum post that seems to indicate it will work, but I would have felt better if there was more info on it: http://virtualdj.com/forums/212473/VirtualDJ_Technical_Support/Pioneer_DJM-900NXS2_support.html?search=pioneer+900+nexus2&page=1
Thanks
In the meantime any real world experience with it would be helpful. I have a gig lined up next week and they have an house set of turntables and a 900 NXS2, I normally play on an S9 or a 62, and I could probably bring one of my mixers and switch it out if I had to, but I was wondering if the 900 NX2 would work with DVS out of the gate or if it was tricky to configure. I can get there a little early, but I don't want to be having a bunch of issues or waste time with it onsite if there are known issues. Thanks....
Like this page shows the DJM 850 and the S9 http://virtualdj.com/manuals/hardware/pioneer/index.html
At the bottom it says the 900 NXS is supported, but doesn't say anything about the NXS2
Ironically, on this page it shows different info: http://virtualdj.com/products/hardware.html?brand=pioneer
It shows the 900 NXS with a graphic and everything, but DOES NOT even show the S9 AT ALL, which I thought was interesting.
But that second link doesn't say anything about the NXS2 either.
I found this OLD forum post that seems to indicate it will work, but I would have felt better if there was more info on it: http://virtualdj.com/forums/212473/VirtualDJ_Technical_Support/Pioneer_DJM-900NXS2_support.html?search=pioneer+900+nexus2&page=1
Thanks
Posté Fri 27 Jul 18 @ 2:51 am
Pioneer DJM-900NXS2 is natively supported
http://www.virtualdj.com/wiki/VirtualDJ8%20Controllers.html
There is no manual available for the DJM-900NXS2, thats why was not listed here http://virtualdj.com/manuals/hardware/pioneer/index.html but added it at the "More" section at the bottom.
The Hardware page shows only a few by default to make the display/download of the page a bit lighter. If you click on "Show All" you ll see the NXS2 listed
http://www.virtualdj.com/wiki/VirtualDJ8%20Controllers.html
There is no manual available for the DJM-900NXS2, thats why was not listed here http://virtualdj.com/manuals/hardware/pioneer/index.html but added it at the "More" section at the bottom.
The Hardware page shows only a few by default to make the display/download of the page a bit lighter. If you click on "Show All" you ll see the NXS2 listed
Posté Fri 27 Jul 18 @ 4:12 am