troymichael
Works like a champ. I am been testing this for several hours. I am not a Scratch DJ but i been working the jog wheel with major back spins and scratchs and it seems rock solid. Really Happy.
First one to post a youtube vid of a good scratch session with the 6000 gets beers on my (but you need to come to Hawaii for the beer).
Thanks Denon & VDJ. Somebody give Silvio & Chris a raise!
First one to post a youtube vid of a good scratch session with the 6000 gets beers on my (but you need to come to Hawaii for the beer).
Thanks Denon & VDJ. Somebody give Silvio & Chris a raise!
Posté Fri 04 Feb 11 @ 12:46 pm
Jam Master Rob
Great news to hear there is a fix for the issues you guys have been having!! I'm not a rich man by any means and I have been drooling over this unit since I heard about it. Still trying to raise funds to purchase this unit but soon it will be mine!! muhahahahah!!!
Posté Fri 04 Feb 11 @ 4:15 pm
DJDAKI1
I also need help. I'm holding the 3 buttons pressed while starting the console, and the cues shine. So the first step does work.
Then I want to open DDJ Updater for DN-MC6000, but the information "midi device not exist" appears.
I have tried out different usb ports, but it doesn't work, the same error information appears.
When starting the console normally, without pressing the 3 buttons, DDJ Updater for DN-MC6000 recognizes the controller, but of course can't do the update.
Then I want to open DDJ Updater for DN-MC6000, but the information "midi device not exist" appears.
I have tried out different usb ports, but it doesn't work, the same error information appears.
When starting the console normally, without pressing the 3 buttons, DDJ Updater for DN-MC6000 recognizes the controller, but of course can't do the update.
Posté Fri 04 Feb 11 @ 5:04 pm
troymichael
Dak,
Samething happened to me . I tried again and got it to work.
Samething happened to me . I tried again and got it to work.
Posté Fri 04 Feb 11 @ 5:07 pm
DJDAKI1
I don't know what I have changed now, but it works now.
Posté Fri 04 Feb 11 @ 5:11 pm
DJ-Evangel
just came back from the club with the new firmware on the mc6000 and was spinning in ASIO mode. (line ins / headphones / asio)
the mc was working very well the whole night long and now i'am very happy with the device :-)
dominik
the mc was working very well the whole night long and now i'am very happy with the device :-)
dominik
Posté Fri 04 Feb 11 @ 10:24 pm
szeppieri
Glad to hear all the positive results so far, enjoy !
Posté Fri 04 Feb 11 @ 10:56 pm
Noallegiance
OK anybody get a time out error?
I've turned it on and off and tried other USB ports but the counter on te Sysex mesage gets up to 5 and just stops every time.
I've turned it on and off and tried other USB ports but the counter on te Sysex mesage gets up to 5 and just stops every time.
Posté Sat 05 Feb 11 @ 2:00 pm
Noallegiance
OK so now my settings are all up the swanny. Was running off WDM and now VDJ keeps saying "Error in sound driver".
Wish I'd left it alone!
Wish I'd left it alone!
Posté Sat 05 Feb 11 @ 2:18 pm
csmurphy
I'm having the same TIME OUT ERROR message.
Posté Sat 05 Feb 11 @ 3:29 pm
Homeboy
Can you post a picture of the time out error? At what point do you get it?
Posté Sat 05 Feb 11 @ 4:00 pm
csmurphy
I JUST WANT THIS THING TO WORK ALREADY!!!
Posté Sat 05 Feb 11 @ 4:01 pm
Homeboy
As I posted 2 seconds ago, can you post a picture and explain when you get the error.
Posté Sat 05 Feb 11 @ 4:03 pm
csmurphy
After I open the file and start the update, it says the following:
"Send sysex message to data control...........
Send sysex message count : 5 ............
Wait .........."
The number goes up from 1 to 5, then a pop up message states: "Time Out Error!!!"
That's all I got - tried everything, different USBs, etc.
"Send sysex message to data control...........
Send sysex message count : 5 ............
Wait .........."
The number goes up from 1 to 5, then a pop up message states: "Time Out Error!!!"
That's all I got - tried everything, different USBs, etc.
Posté Sat 05 Feb 11 @ 4:05 pm
Soundman69
Update done. Everything worked perfectly. You people having problems obviously have computer issues.
Posté Sat 05 Feb 11 @ 4:09 pm
Homeboy
csmurphy wrote :
After I open the file and start the update, it says the following:
"Send sysex message to data control...........
Send sysex message count : 5 ............
Wait .........."
The number goes up from 1 to 5, then a pop up message states: "Time Out Error!!!"
That's all I got - tried everything, different USBs, etc.
"Send sysex message to data control...........
Send sysex message count : 5 ............
Wait .........."
The number goes up from 1 to 5, then a pop up message states: "Time Out Error!!!"
That's all I got - tried everything, different USBs, etc.
I will report this to Denon. I am not sure if there is anything I can do at this point.
Posté Sat 05 Feb 11 @ 4:10 pm
csmurphy
*****Content edited. Please refrain from bashing one another. Soundman that goes for you too. Lets keep this constructive.******
Posté Sat 05 Feb 11 @ 4:14 pm
Homeboy
I will be on and offline all day. You can use skype to contact me live. Skype ID: VDJSupport
Posté Sat 05 Feb 11 @ 4:27 pm
wavelengthcarver
Not sure if there is a n00b section where I should say hello first, if there is my apologies and I'll get on it. I just wanted to say I used my MC6000 for the first time in a 'live' situation tonight and it was solid as a rock :) I just wanted to give a shout out to Jonathan, Product Support Advisor for Denon & Homeboy aka Chris for their help, cheers lads :)
Posté Sat 05 Feb 11 @ 8:24 pm
djsonance
csmurphy wrote :
After I open the file and start the update, it says the following:
"Send sysex message to data control...........
Send sysex message count : 5 ............
Wait .........."
The number goes up from 1 to 5, then a pop up message states: "Time Out Error!!!"
That's all I got - tried everything, different USBs, etc.
"Send sysex message to data control...........
Send sysex message count : 5 ............
Wait .........."
The number goes up from 1 to 5, then a pop up message states: "Time Out Error!!!"
That's all I got - tried everything, different USBs, etc.
I get the same exact time out error as well. I think it only happens to mac users. Others have been posting similar experiences on the denon forums. Really do hope they sort it within the next day or two. Been waiting too long for a firmware update.
Posté Sun 06 Feb 11 @ 5:16 am
