Connexion rapide:  

Forum: VirtualDJ Technical Support

Sujet New to VDJ - Page: 2

Cette partie de ce topic est ancien et peut contenir des informations obselètes ou incorrectes

Try connect speakers for example to Rear output and Headphones at Front outout (or vice versa)

And then in VirtualDJ try what channel that is in the last drop down for master output. Channel 1&2 or Channel 3&4 etc.. If the channels have no names appended, it might be a little bit of testing before you find the correct one (unless labelled "rear" and "front", then its easy ;-))

https://www.virtualdj.com/wiki/Pre-listening-with-headphones.html

 

Posté Sat 17 Apr 21 @ 4:27 pm
FreddemHome userMember since 2013
I have connected speakers to Line out because thats the only output where the speakers is playing, after that i have tried connect my headphones to all the other outputs but no luck

How can i post a screenshot here ?

In audio settings master is speaker 1 & 2
Under headphones under i have 2 more options, when i choose one of those, vdj switch automaticly to usb soundcard, not computer sound ?
 

Posté Sat 17 Apr 21 @ 4:44 pm
You can post screenshots...
Press SHIFT + WIN + S and create a screenshot, save it to desktop and upload in reply (press the last button below where you enter new reply text to upload image)

Strange that you dont have more output channels..
Does your computer have multiple output at back.. not only line-out. but also, rear, front etc

And just to make sure Windows didnt mess up, check if its actually set to surround as well
https://www.virtualdj.com/wiki/Pre-listening%20with%20headphones%20with%20Sound%20cards%20without%20ASIO%20drivers.html

Typically you might have something like this



(and in case others read post in future and have different surround card..)
 

Posté Sat 17 Apr 21 @ 4:53 pm
FreddemHome userMember since 2013
I did check speaker config in windows, and it was on stereo, should i choose 7.1 or 5.1 ?
 

Posté Sat 17 Apr 21 @ 5:31 pm
7.1 should be fine .. apparently supported
VirtualDJ just need 2 separate stereo outputs, so 5.1 will do just fine as well
 

Posté Sat 17 Apr 21 @ 5:44 pm
NicotuxHome userMember since 2014
better choose 5.1 if you are to use line in and mic
but this is not important, anything starting with 4.0 will do
 

Posté Sat 17 Apr 21 @ 5:45 pm
FreddemHome userMember since 2013
I did change to 7.1 but i can still only hear speakers when they are connected to Line in, and i have tried my headphones to all the other outputs but i can still only hear the same as my speaker plays :(
Hmmmm i dont understand this :(
But im SO greatful to all your help :)
Can it be any windows problem ?
 

Posté Sat 17 Apr 21 @ 5:46 pm
Did you set headphones to different channel output than speakers (master) in VDJ settings?
Look at the last drop down for each entry, they can not be same
 

Posté Sat 17 Apr 21 @ 5:47 pm
FreddemHome userMember since 2013
I press post replay but i cant past the screenshot even if i use ctrl v

I cant see any more buttons then post replay here
 

Posté Sat 17 Apr 21 @ 5:53 pm
FreddemHome userMember since 2013
Under headphones under i have 2 more options, when i choose one of those, vdj switch automaticly to usb soundcard, not computer sound ?

Master = speakers chan 1 and 2
Headphones = i have 3 rows
Speakers
Realtek digital output
Nvidia high defination audio

And when i choose the last 2 options, vdj automaticly change hardware from computer audio to usb soundcard
 

Posté Sat 17 Apr 21 @ 5:58 pm
FreddemHome userMember since 2013
 

Posté Sat 17 Apr 21 @ 6:04 pm
NicotuxHome userMember since 2014
Well ok choose
main - speakers - chan 5 and 6
headphones - speakers - chan 1 and 2

this way main output should be REAR and the headphone both Front jack and LINEOUT
(do not take care about the selected buttons, they are automatic for VDJ use)

as well using NVIDIA chan 1 and 2 as headphones can make the monitor send PFL
and use its headphone jack (if any) for the headphone

(in any case do not use "Digital", this is the optical link)
 

Posté Sat 17 Apr 21 @ 6:04 pm
Freddem wrote :
cant paste the screenshot.. cant see any more buttons then post replay here


ah yes, sorry, thats only for licensed users..
Paste here instead : https://pasteboard.co/
And put the link in reply here

And not sure what the video was, you need to use the PC sound card and change CHANNEL at last drop down instead of the sound card select drop down

 

Posté Sat 17 Apr 21 @ 6:05 pm
FreddemHome userMember since 2013
ITS WORKING !!!!!!!! :) :) :)
THAT helpt me Nicotux !!!!!
OMG !!!!
I cant describe how happy i am :)
 

Posté Sat 17 Apr 21 @ 6:09 pm
ah good good ;-)
 

Posté Sat 17 Apr 21 @ 6:10 pm
FreddemHome userMember since 2013
One last question (i think) :) :)

Where can i record my testmixes ?
 

Posté Sat 17 Apr 21 @ 6:37 pm
 

Posté Sat 17 Apr 21 @ 6:48 pm
FreddemHome userMember since 2013
Ok thanx rune :)
 

Posté Sat 17 Apr 21 @ 6:49 pm
FreddemHome userMember since 2013
Shit im happy 😂
Sorry for spamming again 😉
Thanx all for all help

By the way, is it possible to change volyme to the samplers if they plays to silent to match the main track that is playing (if you understood me ) 😀
 

Posté Sat 17 Apr 21 @ 7:06 pm
 

Posté Sat 17 Apr 21 @ 7:17 pm
75%