Hardware Manuals


Numark - 4TRAK  

Effets





KEY

ACTION

SHIFT (SECONDARY) ACTION

53 FX MODE
Switch between Single and Multi FX modes
54 FX MIX BUT
Single FX mode : Turn the selected Effect on/off
Multi FX mode : no action
Single FX mode : Show/hide the FX GUI in the Browser
Multi FX mode : Show/hide the FX GUI of the selected Effects in all FX Slots
55 FX BUT 1
Single FX mode : Enable/disable the 1st Effect button of the selected effect (if available)
Multi FX mode : Turn the selected Effect on/off of FX Slot 1
Single FX mode : same action as the non-shift
Multi FX mode : Select next Effect for FX Slot 1
56 FX BUT 2
Single FX mode : Enable/disable the 2nd Effect button of the selected effect (if available)
Multi FX mode : Turn the selected Effect on/off of FX Slot 2
Single FX mode : same action as the non-shift
Multi FX mode : Select next Effect for FX Slot 2
57 FX BUT 3
Single FX mode : Enable/disable the 3rd Effect button of the selected effect (if available)
Multi FX mode : Turn the selected Effect on/off of FX Slot 3
Single FX mode : same action as the non-shift
Multi FX mode : Select next Effect for FX Slot 3
58 FX MIX
Single FX mode : Select an Effect
Multi FX mode : nothing
Single FX mode : same action as the non-shift
Multi FX mode : nothing
59 FX KNOB 1
Single FX mode : Adjust the 1st Parameter of the selected Effect
Multi FX mode : Adjust the 1st Parameter of the selected Effect in Slot 1
Single FX mode : Adjust the 4th Parameter (if available) of the selected Effect
Multi FX mode : Adjust the 2nd Parameter of the selected Effect in Slot 1
60 FX KNOB 2
Single FX mode : Adjust the 2nd Parameter of the selected Effect
Multi FX mode : Adjust the 1st Parameter of the selected Effect in Slot 2
Single FX mode : Adjust the 5th Parameter (if available) of the selected Effect
Multi FX mode : Adjust the 2nd Parameter of the selected Effect in Slot 2
61 FX KNOB 3
Single FX mode : Adjust the 3rd Parameter of the selected Effect
Multi FX mode : Adjust the 1st Parameter of the selected Effect in Slot 3
Single FX mode : Adjust the 6th Parameter (if available) of the selected Effect
Multi FX mode : Adjust the 2nd Parameter of the selected Effect in Slot 3
62 FILTER BUT
Activate Filter on each deck (when off, the Filter know will not apply on Deck)
The Filter buttons follow the mixer channel order
63 FILTER KNOB
Apply a Low/High Pass Filter to the decks
The Filter buttons follow the mixer channel order


Avant & Arrière