Hardware Manuals


Pioneer DJ - DDJ-REV7 - Disposition  

Égaliseur





  1. FILTER. Apply a Color FX to the Left/Right Channel. By default Filter Color FX is selected. A different Color FX can be chosen via Pioneer DJM-REV7 Setting Utility application.

  2. EQ LOW. Adjust the Low frequencies (Bass) of the Left/Right Channels.

  3. EQ MID. Adjust the Middle frequencies (Mid) of the Left/Right Channels.

  4. EQ HIGH. Adjust the High frequencies (Treble) of the Left/Right Channels.

  5. TRIM. Adjust the Pre-fader Output level (Gain) of the Left/Right Channels.

  6. SOURCE SEL. Select the source for the Left/Right mixer channel. Select USB A or B for Software mixing depending on which of the two USB ports on the back you have connected to your computer.

  7. BOOTH VOL. Adjust the Level of the Booth Output.

  8. MASTER VOL. Adjust the Level of the Master Output.


If the device is running firmware >=2.01, then the Equalizer knobs (21, 22 and 23) can also be used to control stems.
To toggle the knobs between frequencies and stems control, hold down SHIFT button and press the "Flanger" or the "Reverb" FX button.
Platines