Hardware Manuals


Rane - Sixty Two  

Configuration


Connections





  • Connect your computer to USB A (or B) port at the rear panel of Rane Sixty-Two.

  • Connect your Left deck’s RCA cables to ANALOG INPUT 1.
    If it’s a CD player, select CD with the switch above the input jacks.
    If it’s a turntable, select PH (Phono) with the switch above the input jacks. Secure the ground wire to a Phono Ground terminal.

  • Connect your Right deck’s RCA cables to ANALOG INPUT 3.
    If it’s a CD player, select CD with the switch above the input jacks.
    If it’s a turntable, select PH (Phono) with the switch above the input jacks. Secure the ground wire to a Phono Ground terminal

  • Set the SOURCE selector for DECK 1 to A (or B if the USB B port is used).

  • Set the SOURCE selector for DECK 2 to A (or B if the USB B port is used).

  • Connect the Rane Sixty-Two with AC power using the provided cable and power on the unit


Drivers


Windows: Download and install the necessary ASIO drivers from https://www.rane.com/downloads-legacy#sixty-two

Mac OSX: Download and install the necessary CoreAudio drivers from https://www.rane.com/downloads-legacy#sixty-two
.
.

VirtualDJ 8 Setup


Download and install VirtualDJ 8 from http://www.virtualdj.com/download/index.html (in case you have not done already)

Once VirtualDJ 8 is launched, a Login Window will appear. Login with your virtualdj.com account credentials.

A Pro Infinity or a Pro Subscription License is required to use the Rane Sixty-Two. Without any of the above Licenses, the controller will operate for 10 minutes each time you restart VirtualDJ.
http://www.virtualdj.com/buy/index.html



A window will appear next, to verify the proper detection.

Click on the “Use Soundcard” button and VirtualDJ will automatically create and apply the pre-defined audio configuration using the built-in audio interface of the Rane Sixty-Two.

Click to OK.


The unit is now ready to operate with VirtualDJ.

MIDI Operation


The unit should be visible in the CONTROLLERS tab of Config and the “factory default” available/selected from the Mappings drop-down list.

The factory default Mapping offers the functions described in this Manual, however those can be adjusted to your needs via VDJ Script actions.
Find more details at
http://www.virtualdj.com/wiki/VDJ8script.html



AUDIO Setup


The unit has a pre-defined Audio setup and a special button in the AUDIO tab of Config to provide that. Alternative setups can be applied in the same window.

Timecode (DVS)* configuration is pre-configured (see DVS Support for more details).


*requires Pro Infinity or Pro Subscription License http://www.virtualdj.com/buy/index.html





For further software settings please refer to the User Guides of VirtualDJ.
http://www.virtualdj.com/manuals/virtualdj/index.html


Disposition