Hardware Manuals


Reloop - Ready  

Contrôles





CONNECTION

U USB
USB port to connect to a computer
S PC/IOS SOURCE
Set to PC position when using with VirtualDJ
M MASTER OUTPUT
Connect a pair of amplified speakers using a RCA cable or adapter
H HEADPHONES SOCKET
Connect your Headphones using a 1/8 " cable or adapter


KEY

ACTION

SHIFT (SECONDARY) ACTION

S SHIFT
Press this button down to access secondary actions as described in the SHIFT ACTION column
1 PLAY
Play/pause the loaded Track
Play/Stutter
2 CUE
Sets current position as Temporary Cue point. Preview track when paused while button is pressed
Jumps and stops to the Cue point when playing
Jump and stops at the beginning of the Track
3 SYNC
Match BPM and Beat Phase with the opposite deck
Smoothly reset Track's Tempo to its original value
4 MODE
Press and hold this button and then press one of the 8 Pads to select a mode for the Pads. See Pads
Set Pads to Touch FX mode. See Pads
5 PADS
Operation depends on the selected Pads mode. See Pads
Operation depends on the selected Pads mode. See Pads
6 PARAMETER
Adjust the 1st Parameter of the selected Pads mode
Adjust the 2nd Parameter (if available) of the selected Pads mode
7 VINYL
Enable/disable Vinyl mode. When enabled, use the upper part of the jogwheel to scratch and the outer part to nudge. When disabled, use both the upper and outer part of the jogwheel to nudge
Enable/disable Slip mode. When enabled, several actions such as Hotcues, Loops and scratch will act temporary and when done,Track will resume playback from the position it would have been if the action was never triggered
8 KEYLOCK
Enable/disable Keylock (Master Tempo). When enabled, changing the Tempo of the loaded Track will not alter its Key
Match the Key of the loaded Track to the Key value of the other Deck on first press, and reset its Key on 2nd press
9 JOG
Touch sensitive jogwheel for Scratch (when Vinyl mode is enabled) or Bend (when Vinyl mode is disabled)
Fast search (seek) Track
10 PITCH
Adjust track's tempo (BPM)
11 FX LEVEL
Adjust the 1st Parameter (usually Wet/Dry) of the selected Effects from all 3 FX Slots
Adjust the 2nd Parameter of the selected Effects from all 3 FX Slots
12 FX1 - FX3 ON
Enable/disable the selected Effect of FX Slot 1 to FX Slot 3.
Open the Effects drop-down list to select an Effect for FX Slot1 to FX Slot 3. Use the LOOP encoder [13] to scroll up/down and push the LOOP Encoder [13] to select and close the Effects list.
13 LOOP
Turn the encoder (anti)clockwise to half/double the size of the loop.
Push to enable/disable the loop.

When an Effect drop-down selection list is opened (using SHIFT+FX1-3 ON is used), use the encoder to scroll up/down through the Effects list. Push to select the Effect and close the list.
When loop is enable, turn the encoder to forward/backwards move the loop in time by 1 beat a step
14 CROSSFADER
Blends audio signals from left and right decks
15 VOLUME
Adjust Volume Output for Left and Right deck
Adjust Volume Output and and the same time, start Deck when moving from minimum position and stop Track when moving to the minimum position (Fader Start/Stop)
16 PFL
Sends pre-fader audio signal of the Left/Right Deck to the Headphones channel (for pre-listening)
17 FILTER
Apply the selected Color FX (by default FILTER) to the Left/Right Deck. When the knob is at center position (12 o'clock), no Color FX is applied.
18 LOAD
Load the selected Track from Browser to Left/Right Deck. Double-press to clone the Track from a Deck to the other Deck
Unload Track from Left/Right Deck
19 BROWSE
Scroll through Folders or Tracks
Push to toggle focus between Folders and Songs List.
Scroll fast (by +/- 10 Tracks per click.
Push to set focus to Folders list. When in Folders list, expand/collapse sub-folders
20 EQ LOW
Adjust the Low Equalizer frequency Band
21 EQ HIGH
Adjust the both Mid and High Equalizer frequency Band
22 GAIN
Adjust the pre-fader output level (Gain) of Left/Right deck
23 MASTER VOL
Adjust the Volume of the Master Output
24 CUE MIX
Blend in Headphones the signal from the Decks with PFL enabled and the Master Output.
25 CUE VOL
Adjust the Volume of the Headphones Output

Pads