Hardware Manuals


Stanton - SCS.1d - Contrôles  

Effects & Browser


The top 4 encoders, along with the lower 4 buttons, offer Effect and Loop or Browser controls, depending on the selected mode (using buttons 12 and 13).
The LCD displays will show the assigned action depending on the selected mode.

  1. LCD COLOR. Use this button to select the background color for the top LCD displays (green, orange or red).

  2. ENC1.
    In Effects mode, use this encoder to select the Effect for this deck. The name of the selected effect will be displayed on the LCD below. Push the encoder to open/close the GUI of the selected Effect.

    In Browser mode, use this encoder to scroll through folders. Push the encoder to open/close sub-folders (if available)

  3. ENC2.
    In Effects mode, use this encoder to adjust the 1st parameter of the selected effect. If the button below this encoder is turned on, use this encoder to adjust the 3rd parameter of the selected effect. The short name and the value of the effect parameter will be displayed on the LCD below. Push the encoder to open/close the GUI of the selected Effect.

    In Browser mode, use this encoder to scroll through tracks in the Songs List. Push the encoder to load the selected track to the deck.

  4. ENC3.
    In Effects mode, use this encoder to adjust the 2nd parameter of the selected effect. If the button below this encoder is turned on, use this encoder to adjust the 4th parameter of the selected effect. The short name and the value of the effect parameter will be displayed on the LCD below. Push the encoder to open/close the GUI of the selected Effect.

    In Browser mode, use this encoder to scroll through tracks (or samples) in the Sideview. Push the encoder to load the selected track from the Sideview to the deck. If focus in on the Sampler View, push the encoder to play the selected sample.

  5. ENC4.
    In Effects mode, use this encoder to half or double the size of a Loop. Push the encoder to toggle between the Size and the Move mode, and use the same encoder to move the triggered loop backwards or forward.
    The LCD will display the size of the loop and the status (mode) of the Encoder in Loop Move mode.

    In Browser mode, use this encoder to seek through the track loaded to the Prelisten Player Push the encoder start/pause the Prelisten Player. If the Prelisten Player is stopped, moving the encoder will also start the Prelisten Player.

  6. FX BUT1.
    In Effects mode, use this button to enable/disable the selected Effect.

    In Browser mode, use this button to set focus to the Folders list

  7. FX BUT2.
    In Effects mode, use this button to define if the encoder ENC2 (27) will control the 1st or the 3rd Effect parameter.

    In Browser mode, use this button to set focus to the Songs list

  8. FX BUT3.
    In Effects mode, use this button to define if the encoder ENC3 (28) will control the 2nd or the 4th Effect parameter

    In Browser mode, use this button to set focus to the Sideview list. Hold this button for more than 1 second to open/close Sideview, then use this button to cycle though the available views of Sideview (Automix, Sidelist, Karaoke, Sampler and Clone)

  9. LOOP BUT.
    In Effects mode, press this button to enable/disable a loop of a pre-selected size

    In Browser mode, hold this button down for more than 1 second to open/close the Info window of Browser (with the Prelisten Player). Use this button to start/stop the Prelisten Player.

Sampler