Hardware Manuals


Roland - DJ-808 - Disposition  

MIXER & BROWSER CONTRLOLS




  1. CROSSFADER: Blends audio between the left and right assigned channels.

  2. VOLUME: Alter the output Volume of each Mixer Channel.

  3. TRS SAMPLER VOL: Alter the output Volume of both the TRS and software Sampler.

  4. CUE (CH PFL). Press this button to send this channel's pre-fader signal to the Headphones Channel for monitoring. When engaged, the button will be lit.
    Hold SHIFT down and then use the CUE buttons to select a Deck for the Vocal/Pitch unit

  5. CUE (SAMPLER PFL). Press this button to send Sampler signal to the Headphones Channel for monitoring. When engaged, the button will be lit.
    Hold SHIFT down and press this button on tempo to manual adjust the BPM of the TR Sampler (requires firmware update 1.1 or above)

  6. CHANNEL FX KNOB. Use this knob to adjust the Dry/Wet and High/Low Pass parameter of the selected Hardware Effect on each Channel. (middle position is Off position).

  7. CHANNEL FX BUT. Use these buttons to select a Hardware Effect for the Channels (Echo, Jet, Noise and Filter). 4 additional Hardware Mixer Effects are available (require firmware version 1.1 or above) by holding SHIFT down and pressing one of the 4 buttons (led will blink).

  8. * EQ-LOW. Adjust the Low (Bass) frequencies of each mixer channel.

  9. * EQ-MID. Adjust the Mid (Middle) frequencies of each mixer channel.

  10. * EQ-HI. Adjust the High (Treble) frequencies of each mixer channel.

    * Note The device is offering Full Stems controls. See details at EQ Modes

  11. TRIM: Adjusts the pre-fader output level (gain) of each channel mixer.

  12. CHANNEL VU: Indicates the pre-fader output volume of each channel mixer.

  13. MASTER VOLUME : Adjusts the Master Output Volume (Hardware operation - not visible on VirtualDJ GUI)
    The VU meter below this knob indicates the level of the Master Output.

  14. BACK: Set focus to Folders list. If focus is on the Folders list, use this button to open/close sub-folders.

  15. ADD PREPARE: Use this button to add the selected track from the Files List to the Automix List of Sideview.
    Hold SHIFT down and then use this button to cycle through the available views of Sideview (Automix, Sidelist, Sampler and Karaoke)

  16. BROWSE Knob/push :
    Knob: Scrolls through files or folders. When SHIFT is pressed it scrolls faster (+/- 5 tracks/folders)

    Push the knob to select (focus) the next Browser window (Folders List -> Files List -> Sideview and cycle back).
    Hold SHIFT down and then push the BROWSE knob to toggle between the Normal and Zoomed Browser view

  17. LOAD CH3: Press this button to load the selected track from the Browser to Deck 3. Press and hold the same button for more than 1 second, to clone the Track from the Master Deck to this deck.
    Hold SHIFT down and then use this button to sort the tracks of the Files list by Key (toggles between descending and ascending order).

  18. LOAD CH1: Press this button to load the selected track from the Browser to Deck 1. Press and hold the same button for more than 1 second, to clone the Track from the Master Deck to this deck.
    Hold SHIFT down and then use this button to sort the tracks of the Files list by BPM (toggles between descending and ascending order).

  19. LOAD CH2: Press this button to load the selected track from the Browser to Deck 2. Press and hold the same button for more than 1 second, to clone the Track from the Master Deck to this deck.
    Hold SHIFT down and then use this button to sort the tracks of the Files list by Title (toggles between descending and ascending order).

  20. LOAD CH4: Press this button to load the selected track from the Browser to Deck 4. Press and hold the same button for more than 1 second, to clone the Track from the Master Deck to this deck.
    Hold SHIFT down and then use this button to sort the tracks of the Files list by Artist (toggles between descending and ascending order).

  21. BOOTH MONITOR: Adjust the volume of the Booth Output (connection at the rear panel)

  22. PANEL: Cycles through the Mixer panels of the default VirtualDJ GUI (Mixer, Video, Scratch and Master)
    Hold SHIFT down and then use this button to open/close the Sideview List of Browser

  23. Q: Quantize On/off When enabled, Hotcues and Loops will be quantized (applied to the nearest beat) on all 4 decks





Contrôle de la platine