Hardware Manuals


Pioneer DJ - DDJ-REV5 - Disposition  

MIXER & EQ CONTROLS






MIXER CONTROLS


  1. CROSSFADER. Blends audio between Left and Right channels.

  2. VOLUME. Adjust the Volume of each channel.

  3. VU METER. The middle VU meter indicate the overall level of the Master Output (handled by the REV5). The left and right ones Indicate the pre-fader output level of Left/Right Deck respectively. The Deck VU meters can be changed to linear (default) or logarithmic from VirtualDJ Settings. See Advanced Setup

  4. SAMPLER VOLUME. Adjust the Master Output Volume of the VirtualDJ Sampler

  5. CUE (PFL) Press these buttons to send the Left/Right Deck to the Headphones Output channel.

  6. FILTER. Apply the selected Color FX for Left/Right Deck (High/Low-Pass Filter by default). The Color FXs can be changed from VirtualDJ GUI. When in middle position, the Color FX has no effect on the sound.

  7. TRIM. Adjust the Gain of Left/Right Deck.

  8. USB SOURCE. Select USB A or USB B depending on the connected USB port at the rear panel.

  9. 3-BAND EQ. Adjust the Low/Mid/High frequencies (or the assigned Stem part) for each Left/Right Deck. See EQ Mode

  10. MASTER LEVEL. Adjust the level of the Master Output (connections at the rear panel). This is a hardware function, does not control the Master volume of VirtualDJ or vice versa.

  11. BOOTH LEVEL. Adjust the level of the Booth Output (connection at the rear panel). This is a hardware function, does not control the Booth volume of VirtualDJ or vice versa.



Effets